In order to take into account the transport of portable and 360-degree PTZ barrier-free vision, Inspire 2 a total of three forms - mode of transport, landing mode and flight mode. Only in the transport mode, we can put it in the box, and installed in the camera module, you need to first press the 5 power button to change to the landing mode.
Inspire2 biggest change is the matte gray aluminum casing, front binocular camera and FPV camera module, stout motor, more robust paddle lock mechanism and a new design of the battery installation. In addition, Inspire2 tripod becomes more slim and concise, strength seems to have improved.
Carefully observe the top of the fuselage, we can find another bright spot. As the Inspire2 switch to an aluminum alloy shell, in order to prevent obstacles GPS positioning signal, the top of the GPS part of the open a circular hole, and aluminum alloy cover the same color plastic cover GPS antenna instead, so Inspire2 positioning accuracy should not be shell Material changes are affected in any way.
Because the battery has been inserted from the vertical into the tail, so Inspire1 top of the original battery opening was "eliminated", but the four Y-shaped power indicator and power button has been retained. Behind the battery indicator is a battery lock and two infrared perception system, the perception system can ensure that the UAV in the process of rising will not encounter obstacles to facilitate flying in the indoor flight.
没有评论:
发表评论